Here are some items you can 3D print for your boat. I selected these with a small sailboat in mind. Make sure you choose the appropriate material and print settings for your application.
 |
This is a 3D printed version of my $40 Furler, provided by Chris Larsen. Thank you Chris! I highly recommend printing this in ASA plastic (or better) for strength, moisture and UV resistance. Print the spool core and upper disk with 100% infill for maximum strength. Click here for info on the $40 furler |
 |
| Fiddle block with cam cleat |
 |
| Fiddle block without cam cleat |
 |
| Clam cleat |
 |
| Jam cleat |
 |
| Boat hook - threaded |
 |
| Clam cleat |
 |
| Boat hook holder |
 |
| Jamming cleat |
 |
| Blocks for 6mm rope, light loading |
 |
| Block - soft mount for 7-8mm rope |
 |
| Blocks for 12mm rope, light loading |
 |
| Lashing Block |
 |
| Sextant - fully functional |
 |
| Sail tie bungee cord cleat |
 |
| Windex 10 Replacement Wind Vane |
 |
| Windex replacement indicator piece |
 |
| Wind indicator - Little Hawk style (I use this) |
 |
| Shackle key |
 |
| Sister aka Inglefield Flag/burgee clips |
 |
| Rope Splicing Fids (various sizes) |
 |
| Boom Fairlead |
 |
| Mast hoop |
 |
| Masthead Fly |
 |
| Bungee clamcleat |
 |
| Snap Shackle |
 |
| Signal flag cleat wire clamp |
 |
| Shackle Wrench |
 |
| Batten Tip Covers |
 |
| Double Jam cleats - my design used on Ellie |
 |
| Hanger hook - my design. Installed under side deck. Used with a loop of rope to hang rope bolts and other gear |
 |
| Fairleads (my design) |
 |
| Cleat guards, prevents lines from snagging on cleat |
