CNC files for Welsford Sei - FREE

If you're unfamiliar with CNC files, they are 2d vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 foot sheets of plywood, thus creating a partial kit for your boat build.  Below, you can see which parts will be cut out and produced by your CNC operator for this boat (click to enlarge).

This will save you a tremendous amount of time, material, and possibly mistakes vs drawing the parts full size and cutting them out yourself.  Note however that not all parts are included.  Parts such as bulkheads, centerboard cases, transoms, doublers, lower panels, planks (on some boats) and other parts that are defined on John's drawings are included, but parts that are cut-to-fit parts usually are not.  Cut-to-fit parts include parts like seat tops, decking, and usually planks. Those parts are made by clamping an oversized piece of plywood to the boat, tracing the outline of the part, then removing and cutting out the part. Also, some parts may be intentionally oversized by design so that they may be trimmed to the exact size on installation.  Better they be too big than too small.

These CNC files are licensed by John Welsford and provided free of charge under the following conditions:

You must purchase one set of plans from John Welsford per use of these files.
I take every precaution to ensure the content of these files is current and accurate, nevertheless the files are provided "as is" and without warranty.  Use them at your own risk.
Minor alterations may be needed to the files for things like hatch sizes or other customizations.  Contact me if you need assistance with that.

Click this link to download the CNC files for this boat

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

 

CNC files for Welsford Pilgrim - FREE

If you're unfamiliar with CNC files, they are 2d vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 foot sheets of plywood, thus creating a partial kit for your boat build.  Below, you can see which parts will be cut out and produced by your CNC operator for this boat (click to enlarge).

This will save you a tremendous amount of time, material, and possibly mistakes vs drawing the parts full size and cutting them out yourself.  Note however that not all parts are included.  Parts such as bulkheads, centerboard cases, transoms, doublers, lower panels, planks (on some boats) and other parts that are defined on John's drawings are included, but parts that are cut-to-fit parts usually are not.  Cut-to-fit parts include parts like seat tops, decking, and usually planks. Those parts are made by clamping an oversized piece of plywood to the boat, tracing the outline of the part, then removing and cutting out the part. Also, some parts may be intentionally oversized by design so that they may be trimmed to the exact size on installation.  Better they be too big than too small.

These CNC files are licensed by John Welsford and provided free of charge under the following conditions:

1. You must purchase one set of plans from John Welsford per use of these files.
2. I take every precaution to ensure the content of these files is current and accurate, nevertheless the files are provided "as is" and without warranty.  Use them at your own risk.
3. Minor alterations may be needed to the files for things like hatch sizes or other customizations.  Contact me if you need assistance with that.

Click this link to download the CNC files for this boat

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

 

CNC files for Welsford Pathfinder - FREE

If you're unfamiliar with CNC files, they are 2d vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 foot sheets of plywood, thus creating a partial kit for your boat build.  Below, you can see which parts will be cut out and produced by your CNC operator for this boat (click to enlarge).

This will save you a tremendous amount of time, material, and possibly mistakes vs drawing the parts full size and cutting them out yourself.  Note however that not all parts are included.  Parts such as bulkheads, centerboard cases, transoms, doublers, lower panels, planks (on some boats) and other parts that are defined on John's drawings are included, but parts that are cut-to-fit parts usually are not.  Cut-to-fit parts include parts like seat tops, decking, and usually planks. Those parts are made by clamping an oversized piece of plywood to the boat, tracing the outline of the part, then removing and cutting out the part. Also, some parts may be intentionally oversized by design so that they may be trimmed to the exact size on installation.  Better they be too big than too small.

These CNC files are licensed by John Welsford and provided free of charge under the following conditions:

1. You must purchase one set of plans from John Welsford per use of these files.
2. I take every precaution to ensure the content of these files is current and accurate, nevertheless the files are provided "as is" and without warranty.  Use them at your own risk.
3. Minor alterations may be needed to the files for things like hatch sizes or other customizations.  Contact me if you need assistance with that.

Click this link to download the CNC files for this boat

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

 

CNC files for Welsford Navigator - FREE

If you're unfamiliar with CNC files, they are 2d vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 foot sheets of plywood, thus creating a partial kit for your boat build.  Below, you can see which parts will be cut out and produced by your CNC operator for this boat (click to enlarge).

This will save you a tremendous amount of time, material, and possibly mistakes vs drawing the parts full size and cutting them out yourself.  Note however that not all parts are included.  Parts such as bulkheads, centerboard cases, transoms, doublers, lower panels, planks (on some boats) and other parts that are defined on John's drawings are included, but parts that are cut-to-fit parts usually are not.  Cut-to-fit parts include parts like seat tops, decking, and usually planks. Those parts are made by clamping an oversized piece of plywood to the boat, tracing the outline of the part, then removing and cutting out the part. Also, some parts may be intentionally oversized by design so that they may be trimmed to the exact size on installation.  Better they be too big than too small.

These CNC files are licensed by John Welsford and provided free of charge under the following conditions:

1. You must purchase one set of plans from John Welsford per use of these files.
2. I take every precaution to ensure the content of these files is current and accurate, nevertheless the files are provided "as is" and without warranty.  Use them at your own risk.
3. Minor alterations may be needed to the files for things like hatch sizes or other customizations.  Contact me if you need assistance with that.

Click this link to download the CNC files for this boat

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

 

CNC files for Welsford Longsteps - FREE

If you're unfamiliar with CNC files, they are 2d vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 foot sheets of plywood, thus creating a partial kit for your boat build.  Below, you can see which parts will be cut out and produced by your CNC operator for this boat (click to enlarge).

This will save you a tremendous amount of time, material, and possibly mistakes vs drawing the parts full size and cutting them out yourself.  Note however that not all parts are included.  Parts such as bulkheads, centerboard cases, transoms, doublers, lower panels, planks (on some boats) and other parts that are defined on John's drawings are included, but parts that are cut-to-fit parts usually are not.  Cut-to-fit parts include parts like seat tops, decking, and usually planks. Those parts are made by clamping an oversized piece of plywood to the boat, tracing the outline of the part, then removing and cutting out the part. Also, some parts may be intentionally oversized by design so that they may be trimmed to the exact size on installation.  Better they be too big than too small.

These CNC files are licensed by John Welsford and provided free of charge under the following conditions:

1. You must purchase one set of plans from John Welsford per use of these files.
2. I take every precaution to ensure the content of these files is current and accurate, nevertheless the files are provided "as is" and without warranty.  Use them at your own risk.
3. Minor alterations may be needed to the files for things like hatch sizes or other customizations.  Contact me if you need assistance with that.

Click this link to download the CNC files for this boat

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

 

CNC files for Welsford Light Dory - FREE

If you're unfamiliar with CNC files, they are 2d vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 foot sheets of plywood, thus creating a partial kit for your boat build.  Below, you can see which parts will be cut out and produced by your CNC operator for this boat (click to enlarge).

This will save you a tremendous amount of time, material, and possibly mistakes vs drawing the parts full size and cutting them out yourself.  Note however that not all parts are included.  Parts such as bulkheads, centerboard cases, transoms, doublers, lower panels, planks (on some boats) and other parts that are defined on John's drawings are included, but parts that are cut-to-fit parts usually are not.  Cut-to-fit parts include parts like seat tops, decking, and usually planks. Those parts are made by clamping an oversized piece of plywood to the boat, tracing the outline of the part, then removing and cutting out the part. Also, some parts may be intentionally oversized by design so that they may be trimmed to the exact size on installation.  Better they be too big than too small.

These CNC files are licensed by John Welsford and provided free of charge under the following conditions:

1. You must purchase one set of plans from John Welsford per use of these files.
2. I take every precaution to ensure the content of these files is current and accurate, nevertheless the files are provided "as is" and without warranty.  Use them at your own risk.
3. Minor alterations may be needed to the files for things like hatch sizes or other customizations.  Contact me if you need assistance with that.

Click this link to download the CNC files for this boat

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

CNC files for Welsford designs

CNC files for many of John Welsford's designs are now FREE to download!

Working with John Welsford, I have been creating CNC files for many of his designs.  John has granted license of these CNC files to me, and I have decided to give them away for free.

If you're unfamiliar with CNC files, they are 2D vector (.dxf) files that you can bring to a CNC operator.  He will use these files with his CNC machine to cut your parts out of 4x8 sheets of plywood to make you a partial kit.

This will save you a tremendous amount of time, effort, material, and possibly mistakes compared to drawing the parts full size and cutting them out yourself.

CNC files or a partial kit of parts alone are not enough to build one of John's boats.  You will still need to purchase a set of plans from John Welsford, Duckworks, or one of John's other licensed distributors.

I believe these are a win-win for everyone.  Their availability will help John sell more plans so that he can design more boats.  We will get to see more of John's fabulous designs on the water.  They will help builders build their boats more quickly.  I enjoy making them.  And hopefully all of this will contribute to the home boat building community by expanding the comradery we all enjoy.

For more info, and to download the free CNC files, click the following links:

Welsford Light Dory

Welsford Longsteps

Welsford Navigator

Welsford Pathfinder

Welsford Pilgrim

Welsford Sei

Welsford Tender Behind

Welsford Walkabout

Welsford Sherpa

Welsford Houdini 

Welsford Scallywag (coming soon - currently in work)

Others will follow.

Full size paper templates are also available for purchase from Duckworks.  Click here for more info.

If you have any questions or need minor changes to the CNC to customize them for your build, you can e-mail me at j_bergen@yahoo.com and I may be able to help you.